Can I Remove The Laptop Screen And Use An External Monitor?

Is it possible to remove the laptop screen and use an external monitor? Yes, this is entirely feasible. This is exactly what I did with two of my computers that had broken hinges.

Of course, I had to forego the built-in wireless, webcam, and internal microphone. It is certainly possible, but depending on the manufacturer of your laptop, you may get different results. It all depends. I believe you will be alright removing it unless you cause major damage or have “problems.”

Close the lid if possible and use a USB mouse and keyboard if you want to connect the laptop to an external monitor and utilize it from there. If you can’t utilize the screen, look for a video of what you’re trying to do online or consult the owner’s manual.

You Might Also Try This

Check to see if the device removes the laptop screen and uses it as an external monitor. You’re wearing an ESD wristband and your laptop is sitting on an ESD mat (as long as it’s linked to a ground wire of a powered power strip or outlet).

The battery has been removed and the gadget has been unplugged. Ensure that all screws on the outside have been removed. Carefully pry the bezel from the lid with a flat screwdriver. The side or top may be of assistance.

Locate and detach a cable beneath the monitor. Connect the machine to an external monitor and turn it on. I’m not sure whether this helped, but the safest bet is to hunt for what you need online.

You can use several screens or switch between available monitors in Windows. This is useful when your laptop’s display is too small for your requirements but you still need the information on the laptop.

Monitors have different connection kinds, so ensure sure your laptop and monitor have the same connection type and that you have the cable to connect them.

If your monitor connects through VGA, for example, your laptop must have a VGA port and a VGA cable to connect the laptop to the monitor.

1. Plug the monitor’s power wire into an outlet, then connect the video cable to your laptop’s video output port and the monitor’s video input port. Turn on the computer monitor.

2. Select “Screen Resolution” from the drop-down list when right-clicking the Windows desktop. Click the “Detect” button if both monitors aren’t currently shown in the new window.

3. From the Multiple Displays drop-down menu, choose “Show Desktop Only on 2.” Because the laptop’s display is set to Display 1 by default, switching to Display the image on the monitor while leaving the laptop monitor blank.

To increase work productivity on the system, business professionals can connect numerous displays to a single workstation. Users can choose between mirroring the desktop to the second monitor and stretching the screen such that the desktop spans both screens.

The desktop can be expanded to maximize your available workspace and allow you to run many applications at the same time without overloading the screen.

Launch control panel | Start Control Panel | Appearance and Personalization | Adjust Screen Resolution, then Adjust Screen Resolution.

To display the monitor screen and drop-down list, now select “Extend these displays and to divide the desktop between laptop and monitor display then, click “OK.” Steps to remove the laptop screen and use an external monitor

To begin, you’ll need to remove the keyboard. Three screws are usually hidden beneath the paneling on the bottom of a laptop. Remove any screws with a sign suggesting a keyboard screw that is situated on any of the bays (or potentially under your battery).

Remove only these screws, as well as any extra screws that may be holding down the plate that protects the hinge’s base.

‘What Else Should I Consider?’

“Can A Portable Monitor Be Used As A Primary Monitor?”	“Can You Run 144Hz Through USB-C?”
“Best Console Gaming Monitor”	“Best Gaming Monitors Under 150”

Using A Pulling Up Motion, Carefully (VERY CAREFULLY) Remove The Keys

Don’t get mad and try to tear the thing out because it has a ribbon attached to the bottom that sends your keystrokes to the mob. Remove the ribbon, the keyboard, and any paneling if applicable.

Every step of the way should be taken slowly. If it’s a contemporary laptop, there should be two sets of wires. One for the webcam as well as the Wi-Fi antenna, and one for the display.

After gently detaching these wires from the motherboard/onboard graphics cards, you should be able to do one of the following:

1. Disassemble the very complicated LCD framing and collect the wiring (in case you ever need to replace the screen) and/or Wi-Fi antenna, then reassemble the unit.

2. Toss it out and repair the computer.

3. Drink a lot of alcohol and go out with your buddies to have a good time.

Reassemble the laptop, being sure you use the correct screw size. On the way back in, don’t drill through the board. By default, my MSI allows me to alter the BIOS and view POST messages on an external display.

I’d place the screen on a table flat. Then, using a ball-peen hammer, tap till you get small shards of glass. To get the glass to slide away, gently turn it over.

Then clear up any residual glass, and use a vacuum cleaner. Just avoid cutting yourself, be very careful when removing all glass. If you’re careful, you’ll be able to do a tidy job with no evidence of glass. Connect the external display to your laptop’s VGA or HDMI connector, and then turn it on. Select Screen Resolution by right-clicking a space on the Windows desktop.

Alternatively, when on the Start screen, type screen resolution, then click Settings and select Adjust Screen Resolution. You’ll now have a laptop without a display. There are no complex tools required.